上海进口分析仪价格

Instrument calibration/drift correction.

a. Login a minimum of 3 Standard replicates.

b. Weigh a ~1.000 gram of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

c. Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

d. Place the calibration/drift standard into the open port at the top of the loading head.

e. Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

力可创新的批次和重复样品数据分组功能极大简化了样品结果输出和结果标准偏差的自动计算。上海进口分析仪价格

Instrument Highlights and Features

Optional Features

Optional boom-mounted touch-screen interface package (M) promotes an ergonomic workspace

Optional Performance Package (P) adds a three-stage carrier gas purification system, and a dual-loop gas dose module

Optional Dual Cooling Package (D) adds an integratedliquid-to-air radiator with dual cooling fans. This DC

option gives the user the choice of liquid-to-liquid cooling, liquid-to-air cooling, or a combination of both

Optional integrated autocleaner (H) automatically cleans the upper electrode and lower electrode tip

Optional 20-sample shuttle loader available

浙江美国LECO分析仪价格Cornerstone氢氧氮分析软件同时支持***的书记文档格式和可变的报告格式。

Instrument Highlights and Features

Features and Benefits

LED light ring illuminates the furnace area

Choice of either argon or helium carrier gas

Novel electrode design increases heat transfer efficiency for increased stability

Non-touch interface systems are also available

User-friendly brand software

High-Performance Detector Design

Thermostatic construction provides increased protection from ambient temperature fluctuations

Optimized emitter control and detection circuitryimproves the IR cell lifetime and long-term stability,

resulting in superior accuracy and precision

Infrared detection for the determination of oxygen, thermoconductivity detection for the determination

of nitrogen

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of three Standard reps.

Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.

Note: LECO Reference Materia***o not require preparation. See preparation statement on the reference material certificate. Solid Standards may be used to calibrate when chip or powder standards are not available.

采用三个**的红外器检测氧含量，同时检测CO和CO2，然后在转化为CO2集中检测。

仪器的亮点和优势：

特点和优势

·炉头区域LED照明系统

·炉头快速拆装的粉尘过滤装置

·装有自动旁路阀的可快速拆装氧水捕集装置

·**的动态流量补偿（DFC）保证热导池气体流量、压力恒定

高效脉冲炉冷却系统

·强力内循环水冷装置热交换效率

·双直流风扇保证持续冷却，不受电压波动的影响

·***电极炉头设计，提高脉冲炉

全自动分析系统（可选）

·自动清扫装置

·20位或100位全自动分析系统

·高效全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染

改进的红外检测池技术

·***红外池的恒温绝热技术消除了外界环境温度的干扰

·长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性

·氧高低双量程采用3个碳红外检测器同时检测一氧化碳和二氧化碳，保证准确定量 20位或100位全自动分析系统。山西LECO分析仪厂家供应

稳固的炉头试样加载结构。上海进口分析仪价格

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

One of the most critical chemical specifications of titanium alloys is the hydrogen content. Too high of a

hydrogen content can cause hydrides to precipitate, which can lead to embrittlement and subsequent

cracking when the alloy is stressed. Hydrogen pickup typically occurs during downstream processing steps

such as heat treating, pickling, and cleaning.

The LECO ONH836 is a simultaneous oxygen, nitrogen, and hydrogen determinator that utilizes an electrode furnace, inert carrier gas, and both infrared and thermal conductivity detection to meet the analytical needs of the refractory metal industry. 

This application note was written specifically for use with the LECO ONH836 series determinator.

上海进口分析仪价格

上海禹重实业有限公司致力于仪器仪表，是一家服务型公司。禹重科技致力于为客户提供良好的光谱仪，色谱仪，质谱仪，样品前处理，一切以用户需求为中心，深受广大客户的欢迎。公司从事仪器仪表多年，有着创新的设计、强大的技术，还有一批**的专业化的队伍，确保为客户提供良好的产品及服务。在社会各界的鼎力支持下，持续创新，不断铸造***服务体验，为客户成功提供坚实有力的支持。