山西美国LECO分析仪采购

美国力可LECO氧氮氢分析仪

公司介绍：

美国力可公司(LECO)始于1936年 ，以生产用于冶金、机械、能源、化工、农业、食品及科研开发领域的各种分析仪器。

ONH836氧气/氮气/氢气元素分析仪设计用于使用惰性气体熔融技术对无机材料，铁和非铁合金以及耐火材料中的氧，氮和氢含量进行宽范围的测量。

坚固的样品加载区域可简化日常维护并大程度减少大气污染

用于氧气检测的三重红外电池可实现业内大的检测范围

通过自动化选项提高实验室生产率

可用的自动清洁器大程度地减少了两次分析之间的手动清洁需求

适用于坩埚和样品的20位往复式装载机

安装在动臂上的触摸屏界面可提供更好的人体工程学设计和直观的操作

红外（IR）和热导率（TC）检测器，没有活动部件，也无需手动调节

改善TC电池的稳定性

可绕过的OMI-2载气洗涤塔，提高了TC电池的稳定性

获得Dyanamic流量补偿可进一步增强TC细胞的稳定性

试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染。山西美国LECO分析仪采购

Method Selection

Two methods are described in this application note; either method can be used to analyze iron, steel, nickel-, and cobalt-base alloys. The Precision Method is recommended for general use and will provide the best precision and accuracy throughout the typical O, N, and H concentrations found in this group of metals; approximate cycle time is 3.5 minutes. The Fast Track method can be used where speed of analysis is a critical component; for example, when molten metal is being sampled and results are required in the shortest possible time. This method will produce suitable results for most samples; approximate cycle time is 2.25 minutes. As noted above, sampling and sample preparation are key elements to accurate O, N, and Hdetermination as well. It is up to the user to determine which method best meets their needs.

专业分析仪供应商Cornerstone氧氮氢分析软件分成4个主要部分：分析、诊断、设定、仪器，界面可快速导航和组织。

Procedure - Solid Samples

Determine the instrument blank.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of 3 Standard replicates.

Weigh approximately *** grams of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

Note: LECO Reference Materia***o not require preparation.See preparation statement on the reference material certificate.

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.

Add approximately 0.05 g of *** Graphite Powder to a 782-720 Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Titanium is a metal that can be combined with elements such as aluminum, vanadium, molybdenum, and tin to produce high-strength, lowdensity, and corrosion-resistant alloys. Titanium alloys are used by the military, medical devices, sporting goods, and aerospace industries because of these properties, and due to the strict demands of these industries, effort needs to be taken to assure that the material meets the highest of quality standards.

***电极炉头设计，提高脉冲炉热交换效率。山西美国LECO分析仪采购

***触摸屏技术，用户友好界面软件进行校正、分析、诊断等。山西美国LECO分析仪采购

Procedure - Solid Samples

Instrument calibration/drift correction.

Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

上海禹重实业有限公司致力于仪器仪表，是一家服务型的公司。公司自成立以来，以质量为发展，让匠心弥散在每个细节，公司旗下光谱仪，色谱仪，质谱仪，样品前处理深受客户的喜爱。公司将不断增强企业重点竞争力，努力学习行业知识，遵守行业规范，植根于仪器仪表行业的发展。禹重科技秉承“客户为尊、服务为荣、创意为先、技术为实”的经营理念，全力打造公司的重点竞争力。