江苏元素分析仪

ONH836氧氮氢分析仪

高频燃烧红外检测技分析无机材料中的碳、硫含量。

采用惰性气体保护熔融法，提供各种无机材料、钢铁、有色金属、硬质合金、难熔金属、陶瓷等材料中宽范围的氧氮氢同时分析。

该仪器配置MS Windows®的软件接口，专为触摸屏操作定制。长期的开发研究与客户反馈相结合，这个简单方便的软件使得用户可以快速完整访问仪器控制，分析设置，故障诊断，数据报告， **提高日常分析的效率并节省用户宝贵的时间。 可选的Cornerstone® Mobile软件功能，使得用户可以在手机，便携式电脑及台式电脑上便捷的访问仪器数据，分析曲线图形以及仪器的状态，实现对仪器的遥控。

ONH836仪器通过***采纳客户的反馈意见和创新设计。江苏元素分析仪

LECO—Your source for total analytical solutions

CS CS 844 and 744 Series: Carbon/Sulfur by Combustion

Carbon and sulfur determination by combustion infrared detection

Quick, accurate, and affordable determination for both production control and research

Calibration, analysis, evaluation, and diagnostic functions accessible via user-friendly brand software

GDS GDS 500A and 850A Atomic Emission Spectrometers

Spectral range from 120 to 800 nm

Continuous profile of concentration/thickness

Large, dynamic range with concentrations from ppm to 100% by weight

Short analysis time (minutes)

江苏元素分析仪可以旁路的OMI-2 气路强化过滤装置增强了检测器的稳定性，使得分析结果更加准确。

Method Selection

Two methods are described in this application note; either method can be used to analyze iron, steel, nickel-, and cobalt-base alloys. The Precision Method is recommended for general use and will provide the best precision and accuracy throughout the typical O, N, and H concentrations found in this group of metals; approximate cycle time is 3.5 minutes. The Fast Track method can be used where speed of analysis is a critical component; for example, when molten metal is being sampled and results are required in the shortest possible time. This method will produce suitable results for most samples; approximate cycle time is 2.25 minutes. As noted above, sampling and sample preparation are key elements to accurate O, N, and Hdetermination as well. It is up to the user to determine which method best meets their needs.

Procedure - Solid Samples：

--Instrument calibration/drift correction.

Place the nickel basket containing the calibration/drift standard into the open port at the top of the loading head.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner.

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a***Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen,the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3i a minimum of three times for each calibration/drift standard used.

氧高低双量程采用3个碳红外检测一氧化碳和二氧化碳，保证准确定量。江苏元素分析仪

由于在重大工程、工业装备和质量保证、基础科研中，仪器仪表都是必不可少的基础技术和装备重点，除传统领域的需求外，新兴的智能制造、离散自动化、生命科学、新能源、海洋工程、轨道交通等领域也会产生巨大需求。中国的新型工业化进程，信息化和工业化融合的进一步加深，带动各个工业领域对于光谱仪，色谱仪，质谱仪，样品前处理等产品的需求。在国民经济运行中，从事仪器科技、医疗科技、检测科技领域内的技术咨询、技术服务，仪器仪表的修理，仪器仪表、实验室设备、机械设备及配件、机电设备及配件、电子产品、化工产品及原料（除危险化学品、监控化学品、烟花爆竹、民用易爆物品、易制毒化学品）、第二类医疗器械的销售，机械设备租赁，电子商务，货物进出口，技术进出口。等设备是提高劳动生产率的倍增器，对国民经济有着巨大的作用和影响力。美国商业部地区技术和标准研究院（NIST）提出的报告称：美国90年代仪器仪表工业产值只占工业总产值的4%，但它对国民经济（GNP）的影响面却达到66%。从贸易广义角度来说，仪器仪表也可具有自动操控、报警、信号传递和数据处理等功能，例如用于工业生产过程自动操控中的气动调节仪表，和电动调节仪表，以及集散型仪表操控系统也皆属于仪器仪表。江苏元素分析仪

上海禹重实业有限公司致力于仪器仪表，以科技创新实现***管理的追求。禹重科技拥有一支经验丰富、技术创新的专业研发团队，以高度的专注和执着为客户提供光谱仪，色谱仪，质谱仪，样品前处理。禹重科技始终以本分踏实的精神和必胜的信念，影响并带动团队取得成功。禹重科技始终关注仪器仪表市场，以敏锐的市场洞察力，实现与客户的成长共赢。