力可ONH836氧氮氢分析仪
特征
稳固的炉头试样加载结构
试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染；
简化日常分析所需的炉头进样部分机械维护工作。
可选的自动功能
上下电极自动清扫装置；
20位试样及坩埚自动进样装置。
附加功能及优点
可选六轴可旋转触摸屏幕，增强了操作的工效和直观性；
可选具有压力补偿和温度控制性能的标气检测气路；
新型气路管道减少气路连接阀，使得漏气，断路故障更少；
配置SmartLine Remote远程诊断功能。
双直流风扇保证持续冷却，不受电压波动的影响。山东美国LECO分析仪厂家供应
Procedure - Solid Samples
Instrument calibration/drift correction.
Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.
Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.
Note: samples using automation should be placed in the appropriate autoloader position before starting the
analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.
Procedure – Powder/Chip Samples
Determine the instrument blank.
Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.
Repeat steps 2b through 2g a minimum of three times.
Set the blank following the procedure outlined in the operator's instruction manual.
Instrument calibration/drift correction.
Login a minimum of three Standard reps.
Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.
美国LECO力可氧氮氢分析仪ONH836（氧氮氢联测仪）系列硬件部分
特点和优势
1、炉头区域LED照明系统
2、炉头快速拆装的粉尘过滤装置
3、装有自动旁路阀的可快速拆装氧水捕集装置
4、**的动态流量补偿（DFC）保证热导池气体流量、压力恒定
5、改进的红外检测池技术
新红外池的恒温绝热技术消除了外界环境温度的干扰
长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定
氧高低双量程采用3个碳红外检测器，同时检测一氧化碳和二氧化碳，保证准确定量
6、高效脉冲炉冷却系统
强力内循环水冷装置
双直流风扇保证持续冷却，不受电压波动的影响
新电极炉头设计，提高脉冲炉热交换效率
7、全自动分析系统（可选）
自动清扫装置
20位或100位全自动分析系统
高速全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染
Cornerstone氧氮氢分析软件同时支持***的数据文档格式和可变的报告格式。
Sample Preparation
Sampling and sample preparation is an important issue because traditional methods used to obtain samples for oxygen and nitrogen determination are different from those recommended for hydrogen, especially when sampling molten metal. The main difference in steel sampling procedures for oxygen/nitrogen and hydrogen is due to the mobilityof hydrogen. Special precautions must be used when sampling for hydrogen. From molten steel and iron, a sample must be quickly quenched in cold water and chilled in a refrigerant such as liquefied nitrogen or a mixture of acetone and solid carbon dioxide in order to reduce losses of hydrogen from diffusion. Losses of oxygen and nitrogen from diffusion are not a problem. A sample that is taken for hydrogen and
chilled in a refrigerant can also be used for oxygen and nitrogen determination. However, a sample that is typically taken for oxygen and/or nitrogen determination is not suitable for hydrogen determination due to hydrogen loss (diffusion). Surface contamination must be removed by filing or light grinding, using care not to overheat the sample.
可选具有压力补偿和温度控制性能的标气检测气路。山东LECO氧氮氢分析仪采购
OHN836系列仪器采用惰性熔融法。山东美国LECO分析仪厂家供应
Oxygen, Nitrogen, and Hydrogen in Refractory Metals
Summary
Titanium is a metal that can be combined with elements such as aluminum, vanadium, molybdenum, and tin to produce high-strength, lowdensity, and corrosion-resistant alloys. Titanium alloys are used by the military, medical devices, sporting goods, and aerospace industries because of these properties, and due to the strict demands of these industries, effort needs to be taken to assure that the material meets the highest of quality standards.
山东美国LECO分析仪厂家供应
