广东专业分析仪采购

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of three Standard reps.

Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.

Note: LECO Reference Materia***o not require preparation. See preparation statement on the reference material certificate. Solid Standards may be used to calibrate when chip or powder standards are not available.

20位试样自动进样系统。广东专业分析仪采购

美国力可LECO氧氮氢分析仪

公司介绍：

美国力可公司(LECO)始于1936年 ，以生产用于冶金、机械、能源、化工、农业、食品及科研开发领域的各种分析仪器。

ONH836氧气/氮气/氢气元素分析仪设计用于使用惰性气体熔融技术对无机材料，铁和非铁合金以及耐火材料中的氧，氮和氢含量进行宽范围的测量。

坚固的样品加载区域可简化日常维护并大程度减少大气污染

用于氧气检测的三重红外电池可实现业内大的检测范围

通过自动化选项提高实验室生产率

可用的自动清洁器大程度地减少了两次分析之间的手动清洁需求

适用于坩埚和样品的20位往复式装载机

安装在动臂上的触摸屏界面可提供更好的人体工程学设计和直观的操作

红外（IR）和热导率（TC）检测器，没有活动部件，也无需手动调节

改善TC电池的稳定性

可绕过的OMI-2载气洗涤塔，提高了TC电池的稳定性

获得Dyanamic流量补偿可进一步增强TC细胞的稳定性

上海专业元素分析仪稳固的炉头试样加载结构。

736 Series: Oxygen/Nitrogen by Inert Gas Fusion

The 736 family of Elemental Analyzers is designed for routine measurement of oxygen and nitrogen content of

inorganic materials, ferrous and nonferrous alloys, andrefractory materials using the inert gas fusion technique.

These instruments feature our Cornerstone brand ® software, a custom interface designed specifically for

touch-screen operation. Developed by combining longterm research with customer feedback, this easy-to-use

software gives you complete access to instrument control, analysis settings, diagnostics, reporting, and more—without sacrificing valuable bench space.

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

全自动分析系统（可选） 。

美国LECO力可氧氮氢分析仪ONH836（氧氮氢联测仪）系列硬件部分

特点和优势

1、炉头区域LED照明系统

2、炉头快速拆装的粉尘过滤装置

3、装有自动旁路阀的可快速拆装氧水捕集装置

4、**的动态流量补偿（DFC）保证热导池气体流量、压力恒定

5、改进的红外检测池技术

     新红外池的恒温绝热技术消除了外界环境温度的干扰

   长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定

   氧高低双量程采用3个碳红外检测器，同时检测一氧化碳和二氧化碳，保证准确定量

  6、高效脉冲炉冷却系统

   强力内循环水冷装置

   双直流风扇保证持续冷却，不受电压波动的影响

   新电极炉头设计，提高脉冲炉热交换效率

  7、全自动分析系统（可选）

   自动清扫装置

   20位或100位全自动分析系统

   高速全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染

国际**的非色散红外及热导检测器 ，无移动部件，不需要手动调整。上海专业元素分析仪

无需人工干预的全自动清扫系统。广东专业分析仪采购

User-Friendly Brand Software Cornerstone

LECO's exclusive brand software enables the user to have complete access to analysis Cornerstone control, method settings, diagnostics, reporting, and more in a highly organized and immersive environment. Designed through a collaboration of customer feedback and innovative engineering,Cornerstone allows the user to conduct all of their day-to-day operations within a single Analysis screen designed for speed and ease-of-use. Our innovative grouping of sample data into sets and replicates simplifies the data output and automatically calculates relevant statistics, alleviating the need for additional data processing.

广东专业分析仪采购