仪器的亮点和优势：
特点和优势
·炉头区域LED照明系统
·炉头快速拆装的粉尘过滤装置
·装有自动旁路阀的可快速拆装氧水捕集装置
·**的动态流量补偿（DFC）保证热导池气体流量、压力恒定
高效脉冲炉冷却系统
·强力内循环水冷装置热交换效率
·双直流风扇保证持续冷却，不受电压波动的影响
·***电极炉头设计，提高脉冲炉
全自动分析系统（可选）
·自动清扫装置
·20位或100位全自动分析系统
·高效全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染
改进的红外检测池技术
·***红外池的恒温绝热技术消除了外界环境温度的干扰
·长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性
·氧高低双量程采用3个碳红外检测器同时检测一氧化碳和二氧化碳，保证准确定量 可选六轴可旋转触摸屏幕，增强了操作的工效和直观性。专业分析仪厂家报价
氧氮氢分析仪
氧氮氢分析仪是一种用于材料科学领域的仪器，于2016年03月09日启用。
技术指标
测量范围： ON 低氧0.0－300ppm OH 低氧0.0－300ppm 高氧0.0－2% 高氧0.0－2% 低氮0.0―300ppm 低氢0.0－50ppm 高氮0.0－2% 高氢0.0－1000ppm 灵敏度： 氧0.01ppm；氮0.1ppm；氢0.01ppm。
主要功能
该仪器配置有16位微处理器和两个**的分别检测高氧和低氧的 红外检测池。氮和氢通过双重范围的热导检测池测量。分析过程中可自动实现从 低范围到高范围的切换。样品在高功率脉冲炉的石墨坩埚中加热可达3000℃以上 高温，脉冲炉采用循环水冷却。该仪器具有灵敏度高、性能好、测量范围宽和分 析结果准确可靠等优点。ONH-2000氧氮氢分析仪是为快速、准确测定铜、钢、铸 铁、合金、钛、镍、钼、锆、陶瓷和其它无机材料中氧、氮、氢的含量而专门设计 制造的。 湖南氧氮氢分析仪价格试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染。
Procedure - Solid Samples
Instrument calibration/drift correction.
Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.
Firmly place the crucible on the lower electrode tip or appropriate autoloader position.
Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.
Repeat steps 3b through 3j a minimum of three times for each calibration/drift standard used.
Calibrate/drift following the procedure outlined in the operator's instruction manual.
company profile
Shanghai Uzong Industrial Co., Ltd. (hereinafter referred to as UZONGLAB®) is a high-tech company that provides integrated solutions for intelligent laboratories, mainly serving the Chinese market and countries along the “Belt and Road”. It has three business divisions and one The technology center, namely the instrument business department, consumables business department, project development department, and Zhongyu Lianhe Technology Center. In addition to the Shanghai headquarters, we have established branches in Beijing, Shenyang, Shijiazhuang, Taiyuan, Qingdao, Guangzhou, Chengdu and Urumqi. To provide customers with more professional, safer and more convenient products and services is our sole goal. Cornerstone氧氮氧分析软件允许用户在单一分析界面中完成日常的所有工作，快速而且简单易用。
Procedure – Powder/Chip Samples
Prepare the instrument as outlined in the operator's instruction manual.
Login a minimum of three Blank reps.
Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Insert a *** Nickel Capsule (leave capsule open) into the open port at top of loading head.
Note: samples using automation should be placed in the appropriate autoloader position before starting the analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.
国际**的非色散红外及热导检测器 ，无移动部件，不需要手动调整。专业分析仪厂家报价
Procedure - Solid Samples
Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.
Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner
Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.
Firmly place the crucible on the lower electrode tip or appropriate autoloader position.
Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically
