上海氧氮氢分析仪多少钱

Sample Preparation

Sampling and sample preparation of refractory metals such as titanium and zirconium is somewhat different from that of steel. Unlike steel samples, hydrogen is not as mobile in this group of materials; therefore, storage in liquid nitrogen or dry ice is not required. However, it is important to keep the sample cool when cutting or sectioning. Sample preparation for oxygen and nitrogen determination has beendifferent from that of hydrogen determination.

氧氮氢分析仪选哪家？给你推荐上海禹重科技！上海氧氮氢分析仪多少钱

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Place the Nickel Capsule containing the sample into the open port at the top of the loading head.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.

山东进口分析仪优惠价格长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性。

力可ONH836氧氮氢分析仪

特征

稳固的炉头试样加载结构

试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染；

简化日常分析所需的炉头进样部分机械维护工作。

可选的自动功能

上下电极自动清扫装置；

20位试样及坩埚自动进样装置。

附加功能及优点

可选六轴可旋转触摸屏幕，增强了操作的工效和直观性；

可选具有压力补偿和温度控制性能的标气检测气路；

新型气路管道减少气路连接阀，使得漏气，断路故障更少；

配置SmartLine Remote远程诊断功能。

Procedure - Solid Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3j a minimum of three times for each calibration/drift standard used.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

强力内循环水冷装置。

Procedure - Solid Samples

Determine the instrument blank.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of 3 Standard replicates.

Weigh approximately *** grams of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

Note: LECO Reference Materia***o not require preparation.See preparation statement on the reference material certificate.

20位或100位全自动分析系统。新疆氧氮氢分析仪厂家报价

分析软件同时包括实时的环境参数的监测，提供完整的系统图表的模拟。上海氧氮氢分析仪多少钱

氧氮氢分析仪的优点

采用惰气熔融技术，同时测定氧、氮和氢元素含量

新设计封闭气路系统，优化气路循环，使氧氮氢测量更准确

可采用更廉价的氩气作为载气

催化炉温度可调，使氧的测量更加准确

气路系统都采用电磁阀控制，新增分段式漏气检测

水冷样品加样端口，有效隔绝杂质气体侵入

仪器配置和氧、氮、氢测量范围可灵活选择

新设计的高灵敏度红外检测池和热导池，有极低的检出限

分析时间短

脉冲炉功率高达8.5kw，温度3000℃

颗粒状样品无需胶囊包裹，使用经济实惠

化学试剂及管路隐藏在门后（可移除）

强大的分析软件（支持数据和应用报告导出、增加评论区及其他更多功能）。

单点和多点校正（线性回归）

可采用自来水、冷却循环水机或交换机冷却

新设计的产品可用于各类生产控制和实验室。

上海氧氮氢分析仪多少钱

上海禹重实业有限公司位于友东路237号1幢104室。禹重科技致力于为客户提供良好的光谱仪，色谱仪，质谱仪，样品前处理，一切以用户需求为中心，深受广大客户的欢迎。公司注重以质量为中心，以服务为理念，秉持诚信为本的理念，打造仪器仪表良好品牌。在社会各界的鼎力支持下，持续创新，不断铸造***服务体验，为客户成功提供坚实有力的支持。