力可ONH836氧氮氢分析仪
特征
稳固的炉头试样加载结构
试样加载过程中完全密闭,消除大气的中可能带来的杂质的污染;
简化日常分析所需的炉头进样部分机械维护工作。
可选的自动功能
上下电极自动清扫装置;
20位试样及坩埚自动进样装置。
附加功能及优点
可选六轴可旋转触摸屏幕,增强了操作的工效和直观性;
可选具有压力补偿和温度控制性能的标气检测气路;
新型气路管道减少气路连接阀,使得漏气,断路故障更少;
配置SmartLine Remote远程诊断功能。
提供各种无机材料、钢铁、有色金属、硬质合金陶瓷材料中宽范围的氧氮氢同时测定。山西美国分析仪哪家好
Sample Preparation
Sampling and sample preparation of refractory metals such as titanium and zirconium is somewhat different from that of steel. Unlike steel samples, hydrogen is not as mobile in this group of materials; therefore, storage in liquid nitrogen or dry ice is not required. However, it is important to keep the sample cool when cutting or sectioning. Sample preparation for oxygen and nitrogen determination has beendifferent from that of hydrogen determination.
广东氧氮氢分析仪厂家直销可以旁路的OMI-2 气路强化过滤装置增强了检测器的稳定性,使得分析结果更加准确。
Procedure - Solid Samples
Instrument calibration/drift correction.
Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.
Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.
Note: samples using automation should be placed in the appropriate autoloader position before starting the
analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.
氧氮氢分析仪的常见故障及解决方法
仪器启动时显示。没有水流。系统分析电流切断,分析停止。这是水流探测器不正常,水泵不工作,管道堵塞。将仪器的右面板取下,观察水流探测器,用手挤压补水塑料水瓶,发现水流正常,显示正常,证明水流探测器正常,管道畅通。启动循环水泵,但分析仪显示没有水流,此时可判定水泵不正常。打开水泵转子密封口,启动泵发现电机正常运转,此时关闭进水,拆下水泵,发现叶轮脱落。经了解,判定是由于外部冷却水停水,仪器内循环水温过高(水温应≤70℃),致使叶轮(叶轮材料PVC)热胀并脱轴。用粘合剂粘合叶轮后再粘于叶轮轴上,待粘合剂凝固后试车,仪器运行正常。 OHN836系列仪器采用惰性熔融法。
Procedure – Powder/Chip Samples
Determine the instrument blank.
Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.
Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.
Add approximately 0.05 g of *** Graphite Powder to a 782-720 Graphite Crucible.
Firmly place the crucible on the lower electrode tip or appropriate autoloader position.
试样加载过程中完全密闭,消除大气的中可能带来的杂质的污染。山西美国分析仪哪家好
company profile
Shanghai Uzong Industrial Co., Ltd. (hereinafter referred to as UZONGLAB®) is a high-tech company that provides integrated solutions for intelligent laboratories, mainly serving the Chinese market and countries along the “Belt and Road”. It has three business divisions and one The technology center, namely the instrument business department, consumables business department, project development department, and Zhongyu Lianhe Technology Center. In addition to the Shanghai headquarters, we have established branches in Beijing, Shenyang, Shijiazhuang, Taiyuan, Qingdao, Guangzhou, Chengdu and Urumqi. To provide customers with more professional, safer and more convenient products and services is our sole goal. 山西美国分析仪哪家好
电流互感器的精度:1.校验用电流互感器精度:0.1S级。误差0.1%,常用于校验计量级电流互感器的准...
【详情】直流漏电流变送器是一种利用磁通门原理(Flux gate)将被测直流电流转换成与该电流成比例输出的直...
【详情】电流传感器的电流位置和速度传感器包括简单的接近开关,可变电感传感器,可变磁阻传感器,同步器,旋转变压...
【详情】根据NB32004-2013标准第7.10.2条规定,在逆变器接入交流电网,交流断路器闭合的任何情况...
【详情】在电流传感器中,通常是穿过绕组孔的金属杆。在RVDT或旋转变压器中,它通常是成形转子或极靴,其相对于...
【详情】电流互感器的精度:1.校验用电流互感器精度:0.1S级。误差0.1%,常用于校验计量级电流互感器的准...
【详情】在测量交变电流的大电流时,为便于二次仪表测量需要转换为比较统一的电流,另外线路上的电压都比较高如直接...
【详情】电流互感器和变压器一样是依据电磁感应原理将一次侧大电流转换成二次侧小电流来测量的仪器。电流互感器是由...
【详情】电流互感器的技术要求:技术要求:额定容量:额定二次电流通过二次额定负荷时所消耗的视在功率。额定容量可...
【详情】直流漏电流传感器则是一种利用磁通门原理将被测直流电流转换成与该电流成比例输出的直流电流或电压信号的测...
【详情】